| CAD/CAE | 0 | 2 laboratories – equipped PC Pentium P4 with 512 MB RAM memory and 120 MB graphics adaptors. PC sets are optimized for working in graphics applications CAD/FEM. Every computer oi equipped with licences software Pro/Engineering 2001 and ANSYS V9 and common software. | design , construction, calculations, simulation |
| Reverse Engineering laboratory | 0 | 1 )FARO Laser ScanArm - 3D measuring device from the company Faro, point-contact accuracy 2σ : 30μ, accuracy of contactless scanning of general plane shapes 2σ : 50μ, Spherical measuring range:2,5m, Reverse Engineering and comparison of the scanned data with the virtual 3D Model, Measuring speed cca.1m2/10min, this device is portable, laboratory conditions not necessary, recommended for complicated surfaces.
2 )Konika Minolta VI-900 - 3D contactless laser scanner from the company Minolta, accuracy of contactless scanning of general plane shares+/-0,1mm, Reverse engineering and comparison of the scanned data with the virtual 3D Model, measuring speed cca. 1m2/3sec., this device is portable, laboratory conditions not necessary, recommended for big parts with simple body
3 ) MORA Ms10 - 3D contact measuring device from the company Mora, accuracy according to MPEE(μm) DIN ISO 10360-2, MPEP(μm):1,8+L/400. measuring ranges xyz: X-1000mm, Y-600mm, Z- 400mm, this device is not portable and it requires laboratory conditions.
| Digitizing, creation of virtual models, |
| Vacuum casting laboratory | 0 | MK vacuum casting - wide range of materials which can be used: ABS, PC, PE, PP, wax, rubber, function go-to enables precise quality of cast materials without remaining air bubbles, max. weight of the cast 1400g, max. size of the cast 450x470x400mm, the cast can contain ribs and threat inserts. | quick and very accurate manufacturing of complex plastic prototype parts, Rapid Tooling
|
| Rapid Prototyping laboratory | 0 | 1 )Dimention BST - device for 3D model prototyping from the company STRATASYS, system of model creation:FDM (Fused Deposition Modeling), used materials: ABS, size of modeling array (XYZ)max. 203x203x305mm, mechaniclly disposable system of supporting BST (Break Support Technology), layer thickness 0,24/0,33mm, speed 1 cm3/10min, the models (prototypes) don´t lose their mechanical properties.
2 ) Vantage SE - system of model creation: FDM, used materials: ABS, ABSi, PC, PC-ABS and PC-ISO, site of modeling array (XYZ) max. 406x355x406mm, the support system can be washed out, layer thickness 0,125/017mm, speed 1cm3/8min
| 1) Manufacturing of solid and accurate prototypes,
2 ) Manufacturing of solid and accurate prototypes with greater dimensions. Possibility to produce real assemblies of non - dismountable pieces.
|
| Test room for testiing bearings | 0 | | Development of testing device for rolling bearings testing |
